Tail, Stop and Turn Signal Lamp

REMOVAL
1. Release trunk lid latch and open trunk lid.
2. Remove fasteners attaching trunk lining to lower rear trunk panel.
3. Move the trunk lining to access the tail lamp fasteners.

Tail,Stop And Turn Signal:

4. Remove nuts attaching tail lamp to lower trunk and quarter panel.
5. Remove tail lamp from vehicle.
6. Disconnect tail lamp wire connector from body wire harness.

INSTALLATION
1. Connect tail lamp wire connector to body wire harness.
2. Place tail lamp in position on vehicle.
3. Install nuts to attach tail lamp to lower trunk and quarter panel.
4. Place trunk lining in position on lower trunk panel