Cigar Lighter/Power Outlet - Customer Preference

NO: 08-24-98

GROUP: Electrical

DATE: May 22, 1998

SUBJECT:

Customer Preference
Cigar Lighter/Power Outlet

MODELS:

1998 - 1999 (LH) Concorde/Intrepid/LHS/300m

DISCUSSION:





The power feed to the cigar lighter/power outlet can be HOT (1 2v - B+) only with the ignition "ON" or HOT (12v - B+) all the time depending on customer preference. To change the operating mode of the cigar lighter/power outlet remove the left side instrument panel end cap to gain access to the junction block (fuse panel). Remove and insert fuse # 6 (upper right of junction block) into the "BAT" or "IGN" location depending on preference (Figure 1, fuse shown in "IGN" position).

NOTE:
TO PREVENT INSTRUMENT PANEL END COVER ATTACHING CLIP DAMAGE, ALIGN THE CLIPS WITH THE SLOTS IN THE INSTRUMENT PANEL BEFORE SNAPPING THE COVER INTO PLACE.

POLICY: Information Only