Manifold Gauge Set Connections

Manifold Gauge Set Connections

CAUTION: Do not use an R-12 manifold gauge set on an R-1 34a system. The refrigerants are not compatible and system damage will result.

Low Pressure Gauge Hose
The low pressure hose (Blue with Black stripe) attaches to the suction service port. This port is located on the suction line, near the accumulator outlet.

High Pressure Gauge Hose
The high pressure hose (Red with Black stripe) attaches to the discharge service port. This port is located on the liquid line between the condenser and the evaporator, near the front of the engine compartment.

Recovery/Recycling/Evacuation/Charging Hose
The center manifold hose (Yellow, or White, with Black stripe) is used to recover, evacuate, and charge the refrigerant system. When the low or high pressure valves on the manifold gauge set are opened, the refrigerant in the system will escape through this hose.