Engine Block Heater: Description and Operation

BLOCK HEATER
An optional engine block heater is available for all models. The heater is equipped with a power cord that is located behind the grille. The cord is attached to an engine compartment component with tie-straps. The heater warms the engine providing easier engine starting and faster warm-up in low temperatures. The heater is mounted in a core hole of the engine cylinder block (in place of freeze plug) with the heating element immersed in engine coolant. The power cord is located behind the radiator grille. Connect the power cord to a grounded, 110-120 volt AC electrical outlet with a grounded, three wire extension cord.

WARNING: DO NOT OPERATE ENGINE UNLESS BLOCK HEATER CORD HAS BEEN DISCONNECTED FROM POWER SOURCE AND SECURED IN PLACE. THE POWER CORD MUST BE SECURED IN ITS RETAINING CLIPS AND ROUTED AWAY FROM EXHAUST MANIFOLDS AND MOVING PARTS.