Headlamp: Service and Repair

REMOVAL
1. Release hood latch and open hood.
2. Remove park and turn signal lamp.

Headlamp Removal/Installation:

3. Remove screws holding top of headlamp module to radiator closure panel.
4. From behind front bumper, remove screws holding bottom of headlamp module to radiator closure panel.
5. Separate headlamp module from radiator closure panel.
6. Disengage wire connector from headlamp bulb.
7. Separate headlamp module from vehicle.

INSTALLATION
1. If removed, install headlamp bulb.
2. Connect headlamp bulb wire connector.
3. Position headlamp in radiator closure panel.
4. From behind front bumper, install the screws holding bottom of headlamp module to radiator closure panel.
5. Install the screws holding top of headlamp module to radiator closure panel.
6. Install park and turn signal lamp.
7. Close hood.