Crankshaft, Engine

MAIN BEARING JOURNAL DIAMETER:
Standard 82.962 mm (3.2662 inch)
Machined 0.25 mm (0 0098 inch) 82.712 mm (3.2564 inch)
Machined 0.50 mm (0.0197 inch) 82.462 mm (3.2465 inch)
Machined 0.75 mm (0.0295 inch) 82.212 mm (3.2367 inch)
Machined 1.00 mm (0.0394 inch) 81.962 mm (3.2269 inch)
Out-of-Round (Max.) 0.050 mm (0.002 inch)
Taper (Max.) 0.013 mm (0.0005 inch)
Oil Clearance (Max.) 0.119 mm (0.0047 inch)

CONNECTING ROD JOURNAL DIAMETER:
Standard 68.962 mm (2.7150 inch)
Machined 0.25 (0.0098 inch) mm 68.712 mm (2.7052 inch)
Machined 0.50 mm (0.0197 inch) 68.462 mm (2.6954 inch)
Machined 0.75 mm (0.0295 inch) 68.212 mm (2.6855 inch)
Machined 1.00 mm (0.0394 inch) 67.962 mm (2.6757 inch)
Out-of-Round (Max.) 0.050 mm (0.002 inch)
Taper (Max) 0.013 mm (0.0005 inch)
Oil Clearance 0.089 mm (0.0035 inch)

GENERAL:
End Clearance 0.100 - 0.430 mm (0.004 - 0.017 inch)