Dome Lamp: Service and Repair

REMOVAL
1. Using a suitable flat blade screw driver, pry dome lamp lens from dome lamp.

Dome Lamp:

2. Remove screws holding dome lamp to roof reinforcement.
3. Separate dome lamp from roof.
4. Disengage dome lamp wire connector from body wire harness.
5. Separate dome lamp from vehicle.

INSTALLATION
1. Position dome lamp at headliner.
2. Connect dome lamp wire connector to body wire harness.
3. Install screws holding dome lamp to roof rein forcement.
4. Place dome lamp lens on dome lamp and snap into place.