Transfer Plate Assembly

Rear Clutch And Rear Servo Sheck Ball Locations:

1. Install rear clutch and rear servo check balls in transfer plate.

Seperator Plate Filter Screen Installation:

2. Install filter screen in upper housing separator plate.

Brace Plate:

3. Align and position upper housing separator plate on transfer plate.
4. Install brace plate. Tighten brace attaching screws to 4 Nm (35 inch lbs.) torque.
5. Install remaining separator plate attaching screws. Tighten screws to 4 Nm (35 inch lbs.) torque.