Tightening Specifications
TORQUE SPECIFICATIONS 5.9L ENGINEDESCRIPTION TORQUE
Camshaft
Bolt 68 Nm (50 ft. lbs.)
Camshaft Thrust Plate
Bolt 24 Nm (210 in. lbs.)
Chain Case Cover
Bolts 41 Nm (30 ft. lbs.)
Connecting Rod Cap
Bolts 61 Nm (45 ft. lbs.)
Crankshaft Main Bearing Cap
Bolts 115 Nm (85 ft. lbs.)
Crankshaft Pulley
Bolts 24 Nm (210 in. lbs.)
Cylinder Head
Bolts (1st Step) 68 Nm (50 ft. lbs.)
Bolts (2nd Step) 143 Nm (105 ft. lbs.)
Cylinder Head Cover
Bolts 11 Nm (95 in. lbs.)
Engine Support Bracket to Block (4wd)
Bolts 41 Nm (30 ft. lbs.)
Exhaust Manifold-to-Cylinder Head
Bolts/Nuts 34 Nm (25 ft. lbs.)
Flywheel
Bolts 75 Nm (55 ft. lbs.)
Front Insulator (All)
Through bolt/nut 95 Nm (70 ft. lbs.)
Front Insulator to Support Bracket (4wd)
Stud nut 41 Nm (30 ft. lbs.)
Through bolt/nut 102 Nm (75 ft. lbs.)
Front Insulator to Block (2wd)
Bolts 95 Nm (70 ft. lbs.)
Generator
Mounting Bolt 41 Nm (30 ft. lbs.)
Intake Manifold
Bolts Refer to Intake Manifold Service and Repair
Oil Pan
Bolts 24 Nm (215 in. lbs.)
Oil Pan
Drain Plug 34 Nm (25 ft. lbs.)
Oil Pump
Attaching Bolts 41 Nm (30 ft. lbs.)
Oil Pump Cover
Bolts 11 Nm (95 in. lbs.)
Rear Insulator-to-Bracket (2WD)
Through-Bolt 68 Nm (50 ft. lbs.)
Rear Insulator-to-Crossmember Support Bracket (2WD)
Nut 41 Nm (30 ft. lbs.)
Rear Insulator-to-Crossmember (4WD)
Nuts 68 Nm (50 ft. lbs.)
Rear Insulator-to-Transmission (4WD)
Bolts 68 Nm (50 ft. lbs.)
Rear Insulator Bracket (4WD Automatic)
Bolts 68 Nm (50 ft. lbs.)
Rear Support Bracket-to-Crossmember Flange
Nuts 41 Nm (30 ft. lbs.)
Rear Support Plate-to-Transfer Case
Bolts 41 Nm (30 ft. lbs.)
Rocker Arm
Bolts 28 Nm (21 ft. lbs.)
Spark Plugs
All 41 Nm (30 ft. lbs.)
Starter Motor
Mounting Bolts 68 Nm (50 ft. lbs.)
Thermostat Housing
Bolts 25 Nm (225 in. lbs.)
Throttle Body
Bolts 23 Nm (200 in. lbs.)
Torque Converter Drive Plate
Bolts 31 Nm (270 in. lbs.)
Transfer Case-to-Insulator Mounting Plate
Nuts 204 Nm (150 ft. lbs.)
Transmission Support Bracket (2WD)
Bolts 68 Nm (50 ft. lbs.)
Vibration Damper
Retainer Bolt 183 Nm (135 ft. lbs.)
Water Pump-to-Chain Case Cover
Bolt 41 Nm (30 ft. lbs.)