Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL
1. Remove air cleaner assembly.
2. Disconnect electrical connector from Idle Air Control (IAC) motor.

Fig. 84 Mounting Bolts (Screws) - IAC:

3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body

INSTALLATION
1. Install IAC motor to throttle body
2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner assembly.