Transfer Shaft Repair

DISASSEMBLY
Refer to Figures 89 through 111 for procedures

Fig. 89:

Fig. 90:

Fig. 91:

Fig. 92:

Fig. 93:

Fig. 94:

Fig. 95:

Fig. 96:

Fig. 97:

Fig. 98:

Fig. 99:

Fig. 100:

Fig. 101:

Fig. 102:

Fig. 103:

Fig. 104:

Fig. 105:

Fig. 106:

Fig. 107:

Fig. 108:

Fig. 109:

Fig. 110:

Fig. 111:

NOTE: Remove or install both governor valves and governor body.

DETERMINING SHIM THICKNESS
Shim thickness need only be determined if any of the following parts are replaced:
- Transaxle case
- Transfer shaft
- Transfer shaft gear
- Transfer shaft bearings
- Governor support retainer
- Transfer shaft bearing retainer
- Retainer snap ring
- Governor support
Refer to Automatic Transmission/Transaxle, Adjustments for bearing adjustment procedure to determine proper shim thickness.

ASSEMBLY
To install transfer shaft, reverse the above procedure.

NOTE: Remove old sealant before applying new sealant. Use MOPAR RTV sealant or equivalent when installing cover.