Convenience Bin Lamp

Unused Convenience Bin Lamp Socket Location:

If the lamp is not used refer to the above image.

REMOVAL

Battery Negative Cable:

1. Disconnect and isolate the battery negative cable.
2. Pull out and remove the convenience bin - cup holder. Refer to Body and Frame/Interior Trim/Drink Holder/Convenience Bin - Cup Holder removal.
3. Insert the trim stick (special tool #C-4755) between access cover and radio bezel, above convenience bin - cup holder.

Convenience Bin Access Cover:

4. Carefully pry the access cover from the instrument panel.
5. Separate the access cover from the vehicle.
6. Using needle-nose pliers, carefully squeeze the vertical metal legs of the lamp hood.
7. Lift the lamp hood upward from the cup holder tray.

Convenience Bin Lamp Bulb:

8. Carefully pull the lamp and wiring rearward from the instrument panel.
9. Pull the lamp hood from the lamp socket.
10. Pull bulb from socket.

INSTALLATION
For installation, for reverse the above procedures.