Oil Pump Replacement

NOTE: Oil pan must be removed prior to removing oil pump.

REMOVAL

1. Remove accessory drive belts.
2. Remove crankshaft damper and timing belt.
3. Remove crankshaft sprocket and key.

Oil Pump Assembly:

4. Remove 5 bolts that attach oil pump to block.
5. Remove oil pump and gasket.

INSTALLATION

1. Clean block and pump surfaces.

Oil Pump Components:

2. Install new gasket making sure that the correct length bolts are used.
3. Torque bolts to 13 Nm (120 inch lbs.).
4. Install crankshaft key and sprocket.
5. Install timing belt.
6. Install crankshaft damper.
7. Install accessory drive belts.