Ignition Coil: Service and Repair

Ignition Coil:

The ignition coil is located at the back of the intake manifold.

REMOVAL
1. Remove air cleaner assembly
2. Disconnect ignition cable from coil.
3. Disconnect wiring harness connector from coil.
4. Remove coil mounting screws.

INSTALLATION
1. Loosely install ignition coil on intake manifold. Tighten the intake manifold fastener to 13 Nm (115 in. lbs.) torque. Tighten ignition coil bracket fasteners to 10 Nm (96 in. lbs.) torque.
2. Connect the wiring harness connector.
3. Connect the coil to distributor ignition cable.
4. Install the air cleaner assembly Tighten the air cleaner fasteners to 25 Nm (225 in. lbs.) torque.