Glove Box Lamp Switch: Service and Repair

REMOVAL

Battery Negative Cable:

1. Disconnect and isolate the battery negative cable.

Glove Box Lamp And Switch:

2. Open glove box door.
3. Using a trim stick (special tool #C-4755), lightly pry [1][2]glove box lamp/switch from instrument panel.
4. Disengage wire connector from glove box lamp and switch.
5. Remove glove box lamp and switch.

Glove Box Lamp:

6. Remove lamp.

INSTALLATION
For installation, reverse the above procedures.

REMOVAL
1. Open glove box door.
2. Using a trim stick, lightly pry glove box lamp/ switch from instrument panel.

Glove Box Lamp And Switch:

3. Disconnect wire connector from glove box lamp.
4. Remove glove box lamp from vehicle.

INSTALLATION
1. Position glove box lamp in vehicle.
2. Connect wire connector from glove box lamp.
3. Position glove box lamp in instrument panel.
4. Press lamp into instrument panel until fully