Electronic Noise Suppressor: Specifications

Tighten the nut that secures the right engine-to-body ground strap eyelet to the rear valve cover stud of the right cylinder head to 5.0 Nm (45 in. lbs.).

Tighten the screw that secures the right engine-to-body ground strap eyelet to the lower rear corner of the right cylinder head. Tighten the screw to 10.7 Nm (95 in. lbs.).

Tighten the screw that secures the left engine-to-body ground strap eyelet to the lower rear corner of the left cylinder head. Tighten the screw to 10.7 Nm (95 in. lbs.).

Tighten the nut that secures the right engine-to-body ground strap eyelet to the inboard speed control servo mounting stud on the right side of the lower plenum panel. Tighten the nut to 3.9 Nm (35 in. lbs.).

Tighten the nut that secures the left engine-to-body ground strap eyelet to the stud on the left side of the lower plenum panel. Tighten the nut to 3.9 Nm (35 in. lbs.).