Front Door Window Glass: Service and Repair

DOOR GLASS

REMOVAL

1. Remove watershield. Refer to Front Door Panel.
2. Remove inner belt molding.
3. Remove outer belt molding.
4. Position glass to gain access to front and rear regulator lift plates through front and rear access holes in door panel.

Fig. 6:

5. Remove clips attaching door glass to regulator lift plates (Fig. 6).
6. Remove glass from regulator lift plates.
7. Disengage glass from glass run weatherstrip.
8. Insert front of glass between glass run channel and outer door panel.

Fig. 7:

9. Lift glass upward and out of exterior side of the opening at top of door (Fig. 7).
10. Remove glass from vehicle.

INSTALLATION

Fig. 6:

1. Install clips that attach door glass to regulator lift plates (Fig. 6).

Fig. 7:

2. Place glass in window opening with front inserted between run channel and outer door panel (Fig. 7).
3. Lower glass downward into door.
4. Insert ends of glass into glass run weatherstrip channels at front and rear of door.
5. Place glass in position on regulator lift plates.
6. Snap glass mounting studs into clips on regulator lift plates.
7. Install radio speaker, if equipped.
8. Install outer belt molding.
9. Install inner belt molding.
10. Verify door glass operation and fit.
11. Install watershield.