P0740

Test 1 Through 2:

Test 3 Through 7:

Symptom:
P0740-TORQUE CONVERTER CLUTCH CONTROL CIRCUIT

When Monitored and Set Condition
P0740-TORQUE CONVERTER CLUTCH CONTROL CIRCUIT

When Monitored:During Electronically Modulated Converter Clutch (EMCC) Operation.

Set Condition: A) Transmission must be in EMCC, with input speed > than 1750 RPM. TCC/L-R sol achieves the maximum duty cycle & can't pull engine speed within 60 RPM of input speed. B) Transmissions in FEMCC & engine slips TCC > than 100 RPM for 10 seconds.

POSSIBLE CAUSES
RELATED DTC P-0750 PRESENT
CONDITIONS NOT PRESENT
INCORRECT FLUID LEVEL
L/R SOLENOID INOPERATIVE
INTERNAL TRANSMISSION PROBLEM - TCC OUT OF RANGE