4-Door Models

Fuel Pump Module Components - 4 Door Models:

The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module. The fuel pump module is located inside of fuel tank.

REMOVAL
1. Remove fuel tank.
2. Remove fuel pump module.
3. Remove electrical connector at sending unit terminals.

Fuel Gauge Sending Unit Release Tab - 4 Door Models:

4. Press on release tab to remove sending unit from pump module.

INSTALLATION
1. Position sending unit to pump module and snap into place.
2. Connect electrical connector to terminals.
3. Install fuel pump module.
4. Install fuel tank.