Transmission Fill

To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
(1) Remove dipstick and insert clean funnel in transmission fill tube.
(2) Add following initial quantity of Mopar ATF +4 to transmission:
(a) If only fluid and filter were changed, add 10 pints (5 quarts) of ATF +4 to transmission.
(b) If transmission was completely overhauled, torque converter was replaced or drained, and cooler was flushed, add 24 pints (12 quarts) of ATF +4 to transmission.
(3) Refer to Fluid Level Check for the proper fill procedures.