Front

REMOVAL
1. Drain the engine cooling system.

Front Water Valve Remove/Install:

2. Unplug the vacuum harness connector from the front water valve actuator.
3. Remove the heater hoses from the nipples on the front water valve.
4. Remove the water valve from the engine compartment.

INSTALLATION
1. Position the water valve in the engine compartment. The arrow on the water valve should be pointed towards the heater core.
2. Install the heater hoses to the nipples on the water valve.
3. Plug in the vacuum harness connector to the front water valve actuator.
4. Fill the engine cooling system.