Door Module: Service and Repair

DOOR MODULE

REMOVAL

1. Remove door glass.
2. Remove inside handle actuator.
3. Disconnect power window harness connector, if equipped.

Fig. 14:

Fig. 15:

4. Remove bolts attaching front door module to door inner panel (Fig. 14) and (Fig. 15).
5. Separate front door module from door.

INSTALLATION

1. Position front door module on door.
2. Install bolts attaching front door module to door inner panel (Fig. 14).
3. Connect power window harness connector, if equipped.
4. Install door glass.
5. Install inside handle actuator.