Positive Crankcase Ventilation: Service and Repair

REMOVAL-CRANKCASE BREATHER VAPOR CANISTER

NOTE: It is recommended to empty the contents of the vapor canister at each oil and filter service interval.

1. Loosen cap from top of vapor canister.
2. Remove nut retaining canister to engine front cover.
3. Slide clamp upwards on hose, then remove hose from crankcase breather.

INSTALLATION-CRANKCASE BREATHER VAPOR CANISTER
1. Position vapor canister with strap over stud on engine front cover. Install retaining nut. Tighten nut 10 Nm (89 inch lbs.).
2. If removed, position hose onto crankcase breather, then position clamp.
3. Position lower portion of hose into vapor canister, then install and tighten cap.