Removal and Replacement

FLOOR CONSOLE

REMOVAL

1. Remove the 4WD shifter boot.
2. Using a trim stick C-4755 or equivalent, pry up the transmission shifter boot from the console.
3. Remove the transmission shifter extension.

Fig. 12:

4. Remove the console inserts. (Fig. 12)

Fig. 13:

5. Remove and discard the three bolts. (Fig. 13)
6. Lift up on the back and remove the console.

INSTALLATION

1. Position the front of the console up under the instrument panel.
2. Lower the back of the console and install three new screws.
3. Install the inserts.
4. Install the transmission shifter extension.
5. Position the transmission shifter boot in place and seat the attachment clips fully.
6. Install the 4WD shifter boot.