Air Injection Filter: Service and Repair

Fig. 3 Air Inlet And Air Pump Air Filter:

The air filter for the air injection pump is located inside a housing located in right-front side of engine compartment. A rubber hose connects the filter housing to air injection pump. The filter is used with this engine only.

REMOVAL
1. Remove rubber tubes at filter housing.
2. Remove filter housing mounting nut and remove housing.
3. Remove lid from filter housing (snaps on).
4. Remove filter from housing.

INSTALLATION
1. Clean inside of housing and lid before installing new filter.
2. Install filter into housing.
3. Install lid to filter housing (snaps on).
4. Position filter housing to fender.
5. Install mounting nut and tighten to 11 Nm (8 ft. lbs.) torque.
6. Install rubber tubes and cap at filter housing.