Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2000 >> Stratus L4-2.0L VIN C >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Locks: Testing and Inspection

VOLTAGE
The following circuit test sequence determines whether or not voltage is continuous through the body harness to switch.
1. Remove the driver door trim panel.
2. Carefully separate multiple terminal block on wiring harness from switch body.
3. Using a voltmeter, connect the ground lead to the Pin 3 of the door lock connector.
a. Using the positive lead, check Pin 1 of the connector for battery voltage. If OK, go to Step b. If not OK, check fuse # 5 in the Junction Block, and fuse # 4 in the Power Distribution Center. If the fuse is OK, repair wire as necessary.
b. Check Pin 2 of the connector for battery voltage. If OK, go to Switch Test. If not OK, check fuse 4 in the Junction Block, and fuse # 16 in the Power Distribution Center. If the fuse is OK, repair wire as necessary.
pro multis · About Operation CHARM