Body Control Module: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove lower steering column cover and knee blocker reinforcement.
3. Disconnect two wire connectors from bottom of Body Control Module (BCM).
4. Remove bolts holding the BCM to the dash panel mounting bracket.
5. Remove the BCM from the mounting bracket.

INSTALLATION
1. Install the BCM onto the mounting bracket.
2. Install the bolts holding the BCM to dash panel mounting bracket.
3. Connect two wire connectors to the bottom of the BCM.
4. Install the lower steering column cover and knee blocker reinforcement.
5. Connect the battery negative cable.