Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2001 >> Caravan FWD L4-2.4L VIN B >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable.
3. Compress the retaining tabs on the cable and slide cable out of bracket.
4. Disconnect electrical connectors and vacuum hose from servo.
5. Remove two nuts attaching speed control cable and mounting bracket to servo.
6. Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo.
7. Remove speed control cable.

INSTALLATION
1. Slide cable into throttle cable bracket and engage retaining tabs.
2. Rotate the throttle cam forward to the wide open position and install speed control cable clasp.
3. Rotate the throttle cam forward to the wide open position and install throttle cable clasp.
4. Install retaining clip that attaches cable to servo.
5. Insert servo studs through holes in the mounting bracket and speed control cable.
6. Install nuts, tighten to 6.7 Nm (60 in. lbs.).
7. Connect vacuum hose to servo.
8. Connect electrical connector.
9. Install servo and bracket and tighten nuts and bolt.
10. Connect negative battery cable.
pro multis · About Operation CHARM