Incomplete Latch Cinch - Pawl Switch Failure

Tests 1 - 2:

Tests 3 - 8:

SYMPTOM
INCOMPLETE LATCH CINCH - PAWL SWITCH FAILURE

WHEN MONITORED
Whenever the power sliding door is operating in the closing direction.

SET CONDITION
The cinch operation was not completed in 4 seconds. This code will set only in the cinch operation after a 4 second time out.

POSSIBLE CAUSES
- DTC present
- Binding door
- Clutch ground open
- Cinch/release motor clutch driver wire open
- Pawl switch sense wire short to ground
- Power sliding door module - pawl switch sense
- Pawl switch