Incomplete Latch Cinch - Ratchet Switch Failure

Test 1:

Tests 2 - 5:

Tests 6 - 9:

SYMPTOM
INCOMPLETE LATCH CINCH - RATCHET SWITCH FAILURE

WHEN MONITORED
Whenever the power sliding door is operating in the closing direction.

SET CONDITION
The cinch operation was not completed in 4 seconds. This code will set only in the cinch operation after a 4 second time out.

POSSIBLE CAUSES
- DTC present
- Binding door
- Ratchet circuit
- Clutch ground open
- Cinch/release motor clutch driver wire open
- Ground wire open
- Sliding door ajar switch sense wire open
- Sliding door ajar switch sense wire short to ground
- Ratchet switch