Incomplete Latch Cinch - Overcurrent

Tests 1 - 2:

Tests 3 - 6:

Tests 7 - 9:

SYMPTOM
INCOMPLETE LATCH CINCH - OVERCURRENT

WHEN MONITORED
Whenever the power liftgate is performing a cinching operation.

SET CONDITION
The latch motor stall current of 6.2 amps has been detected, or a time-out has occurred with no pawl or ratchet failure. This code is set during the power cinching operation.

POSSIBLE CAUSES
- DTC present
- Binding door
- Liftgate latch cinch driver wire open
- Liftgate latch release driver open
- Liftgate latch cinch driver wire short to ground
- Liftgate latch cinch driver wire short to harness ground
- Liftgate latch release driver wire short to ground
- Liftgate latch release driver wire short to harness ground
- Latch assembly