Rear Wiper Motor Replacement

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove rear wiper arm. (Refer to WIPER ARMS - REMOVAL.
3. Open liftgate.
4. Remove liftgate trim panel..
5. Disconnect wire connector from rear wiper motor.

Fig.9 Rear Window Wiper Motor:

6. Remove screws holding rear wiper motor to liftgate.
7. Remove wiper motor from liftgate.

INSTALLATION
1. Position the wiper motor in the liftgate.
2. Install the retaining screws.
3. Connect the wire harness connector.
4. Install the liftgate trim panel.
5. Disconnect wire connector from rear wiper motor.
6. Remove screws holding rear wiper motor to liftgate.
7. Remove wiper motor from liftgate.
8. Close the liftgate.
9. Install the wiper arm. (Refer to WIPER ARMS - INSTALLATION).
10. Connect the battery negative cable.