P1724

P1724 - LINE PRESSURE HIGH

When Monitored and Set Condition:
P1724 - LINE PRESSURE HIGH

When Monitored: Continuously while driving in a forward gear.

Set Condition: The TCM continuously monitors Actual Line Pressure and compares it to Desired Line Pressure. If Actual Line Pressure is more than 10 PSI above Desired Line Pressure, this code will be set.

POSSIBLE CAUSES:
CHECK FOR RELATED DTC'S
INTERMITTENT WIRING AND CONNECTORS
INCORRECT FLUID LEVEL
5-VOLT SUPPLY CIRCUIT OPEN
5-VOLT SUPPLY OPEN - LINE PRESSURE STEADY
PCS CONTROL CIRCUIT OPEN
POOR LPS CONNECTION
5-VOLT SUPPLY CIRCUIT SHORT TO GROUND
PCS CONTROL CIRCUIT SHORTED TO GROUND
INTERNAL TRANSMISSION PROBLEM - LINE PRESSURE HIGH.
LINE PRESSURE SENSOR - CALIBRATION OUT OF LIMITS
TCM - LINE PRESSURE STEADY