Wheel Alignment Specifications Chart

CURB HEIGHT SPECIFICATIONS






WHEEL ALIGNMENT SPECIFICATIONS

NOTE: All specifications are given in degrees.

NOTE: All wheel alignments are to be set with the vehicle at curb height.

CAMBER FRONT WHEEL ALIGNMENT 0.00 degrees PREFERRED SETTING -0.60 degrees to +0.60 degrees ACCEPTABLE RANGE

Cross Camber (Maximum Side-To-Side Difference) FRONT WHEEL ALIGNMENT 0.00 degrees PREFERRED SETTING 0.70 degrees ACCEPTABLE RANGE

CASTER FRONT WHEEL ALIGNMENT +3.00 degrees PREFERRED SETTING +2.00 degrees to +4.00 degrees ACCEPTABLE RANGE

Cross Caster (Maximum Side-To-Side Difference) FRONT WHEEL ALIGNMENT 0.00 degrees PREFERRED SETTING 1.00 degrees ACCEPTABLE RANGE

TOTAL TOE* FRONT WHEEL ALIGNMENT 0.00 degrees PREFERRED SETTING -0.20 degrees to +0.20 degrees ACCEPTABLE RANGE

CAMBER REAR WHEEL ALIGNMENT -0.20 degrees PREFERRED SETTING -0.70 degrees to +0.30 degrees ACCEPTABLE RANGE

TOTAL TOE* REAR WHEEL ALIGNMENT +0.10 degrees PREFERRED SETTING -0.20 degrees to +0.40 degrees ACCEPTABLE RANGE

THRUST ANGLE REAR WHEEL ALIGNMENT 0.00 degrees PREFERRED SETTING -0.15 degrees to +0.15 degrees ACCEPTABLE RANGE

NOTE:
* TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE must be equally split between each front wheel to ensure the steering wheel is centered after setting toe. Positive (+) is Toe-in, Negative (-) is Toe-out.