Throttle Position Sensor: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Loosen the clamp for the air duct at the throttle body.
3. Remove the mounting bolt and nut for the air cleaner box.
4. Pull the air cleaner box and throttle body up to access the throttle position sensor.
5. Remove the throttle position sensor.

INSTALLATION
1. Install the throttle position sensor.
2. Locate the air cleaner box and throttle body and tighten the mounting bolt and nut.
3. Install the air duct hose and tighten the clamp.
4. Connect the negative battery cable.