Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2001 >> Neon L4-2.0L VIN C >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

REMOVAL

Fig.6 Camshaft Position Sensor Location:




The camshaft position sensor is mounted to the rear of the cylinder head.
1. Remove brake booster hose and electrical connector from holders on end of cylinder head cover and reposition.
2. Disconnect electrical connectors from camshaft position sensor.
3. Remove camshaft position sensor mounting screws. Remove sensor.

Fig.7 Target Magnet Removal/Installation:




4. Loosen screw attaching target magnet to rear of camshaft.

INSTALLATION
The camshaft position sensor is mounted to the rear of the cylinder head.
The target magnet has two locating dowels that fit into machined locating holes in end of the camshaft.
1. Install target magnet in end of camshaft. Tighten mounting screw to 3.4 Nm (30 in. lbs.) torque.
2. Install camshaft position sensor. Tighten sensor mounting screws to 9 Nm (80 in. lbs.) torque.
3. Place brake booster hose and electrical harness in holders on end of valve cover.
4. Attach electrical connectors to camshaft position sensor.

pro multis · About Operation CHARM