Exhaust System: Adjustments

ADJUSTMENTS
A misaligned exhaust system is usually indicated by a vibration, rattling noise, or binding of exhaust system components. These noises are sometimes hard to distinguish from other chassis noises. Inspect exhaust system for broken, damaged or loose components such as; clamps, heat shields, isolators, and hanger brackets. Replace or tighten as necessary. It is important that exhaust system clearances and alignment be maintained.

Perform the following procedures to align the exhaust system:

1. Loosen band clamp at catalytic converter pipe to muffler/resonator assembly.

Fig.2:

2. Align the exhaust system by inserting pipe inward or outward until specification is achieved as shown.
3. Tighten band clamp to 54 Nm (40 ft. lbs.).