Instrument Panel Top Cover

INSTRUMENT PANEL TOP COVER

REMOVAL
1. Remove A-pillar trim. Using a trim stick (special tool #C-4755) or equivalent, gently pry out and remove. Refer to: "Body and Trim : Interior Trim : Trim Panel : Service and Repair" Service and Repair

Fig.10 Instrument Panel Top Cover:

2. Using a trim stick, disengage clips attaching rear edge of top cover to instrument panel (Fig. 10).

NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.


3. Pull top cover rearward to disengage hooks attaching front of top cover to instrument panel.
4. Remove top cover from vehicle.

INSTALLATION
1. Place instrument panel top cover in position on vehicle (Fig. 10).
2. Push top cover forward to engage hooks attaching front of top cover to instrument panel.
3. Engage clips attaching rear edge of top cover to instrument panel
4. Pull top cover rearward
5. Install A-pillar trim.