Cooling System Hoses/Clamps

DESCRIPTION-HOSE CLAMPS
The cooling system utilizes both worm drive and spring type hose clamps. If a spring type clamp replacement is necessary, replace with the original Mopar equipment spring type clamp.





CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only a original equipment clamp with matching number or letter.

OPERATION-HOSE CLAMPS
The worm type hose clamp uses a specified torque value to maintain proper tension on a hose connection.
The spring type hose clamp applies constant tension on a hose connection. To remove a spring type hose clamp, only use constant tension clamp pliers designed to compress the hose clamp.