Stabilizer Link: Service and Repair

STABILIZER LINK

REMOVAL
1. Raise and support the vehicle.
2. Remove the upper link nut, retainer and grommet from each link.





3. Remove the lower link nut from the lower suspension arm on each side.

INSTALLATION
1. Install the link lower retainer and grommet on the links.
2. Install the links into the stabilizer bar and lower suspension arm on each side.
3. Install the lower link mounting nut and tighten to 47 Nm (35 ft. lbs.).

NOTE: Ensure both link end caps are facing straight forward.

4. Install the upper link grommet, retainer and nut and tighten to 37 Nm (27 ft. lbs.).
5. Remove support and lower vehicle.