Dome Lamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable
2. Using a small flat blade, pry the left side (driver's side) of the dome lamp lens downward from dome lamp.

Fig.1 Dome Lamp:

3. Allow the lens to hang down, this will disengage the right side of the lamp (passenger's side) from the headliner.

Fig.2 Dome Lamp Lens:

4. Pull the right side of the lamp down and slide the lamp to the right (Fig.2).
5. Separate the lamp from the headliner.
6. Disengage dome lamp wire connector from body wire harness.
7. Separate dome lamp from vehicle.

INSTALLATION
1. Position dome lamp at headliner.
2. Connect dome lamp wire connector to body wire harness.
3. Position the left side of the lamp in the headliner opening and slide lamp to the left.
4. Push the right side of the lamp in the headliner opening and push the lamp lens up into the lamp to secure.
5. Connect the battery negative cable.