Evaporator Temperature Sensor Circuit Shorted (Stored)

Test 1:

SYMPTOM
EVAPORATOR TEMPERATURE SENSOR CIRCUIT SHORTED (STORED)

TEST NOTE
This symptom is diagnosed using the test A/C SWITCH FAULT (STORED).

WHEN MONITORED
With the ignition ON.

SET CONDITION
This DTC will set if the A/C-Heater Control Module sees voltage below 0.06 volts on the Evaporator Temperature Sensor Signal circuit.

POSSIBLE CAUSES
- Check for active HVAC DTCs and system test fault messages
- Stored code(s) test complete.