Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL
The IAC motor is located on the throttle body.
1. Remove air duct and air resonator box at throttle body.

Fig. 37 Throttle Body, Sensors And Electrical Connectors - 4.7L V-8 Engine:

2. Disconnect electrical connector from IAC motor.

Fig. 24 IAT - 4.7L (Threaded Type):

3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.

INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in lbs) torque.
3. Install electrical connector.
4. Install air duct/air box to throttle body.