Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2002 >> Durango 2WD V8-4.7L VIN N >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL

NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB.

Fig.5 Harness Connector Locks:




1. Release the CAB harness connector lock, and remove the harness connector.
2. Remove the controller mounting screws and remove the controller from the HCU.

INSTALLATION

NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB.

1. Position the controller on the bracket.
2. Install the mounting screws and tighten to 6 Nm (53 in. lbs).
3. Install the RWAL valve harness connector into the controller.
4. Install the CAB harness connector into the controller and push down on the connector lock.
pro multis · About Operation CHARM