Bucket Seat Back Cushion / Cover

BUCKET SEAT BACK CUSHION/COVER

REMOVAL

1. Position seat in full forward position.
2. Disengage J-strap at base of seat back.
3. Using a trim stick C-4755 or equivalent, carefully pry off lumbar handle (drivers side only).
4. Disengage wire hanger securing back pad to frame.
5. Separate cover/cushion from seat back frame.

INSTALLATION

1. Position cover/cushion on seat back frame.
2. Engage wire hanger.
3. Engage J-straps at base of seat back.
4. Position lumbar handle on lumbar adjuster and press into place.
5. Return seat to normal position.