Windows: Description and Operation
POWER WINDOWSPower windows are available as factory-installed optional equipment on this model. The Remote Keyless Entry (RKE) system and power lock system are included on vehicles equipped with the power window option.
The power window system allows each of the door windows to be raised and lowered electrically by actuating a switch on the trim panel of each respective door. A master switch on the driver side front door trim panel allows the driver to raise or lower each of the passenger door windows and to lock out the individual switches on the passenger doors from operation. The power window system receives battery feed through a circuit breaker in the junction block, only when the ignition switch is in the ON position.
The power window system includes the power window switches on each door trim panel, the circuit breaker in the junction block, and the power window motors inside each door. The group covers diagnosis and service of only the electrical components in the power window system.
Power Window Switch
The power windows are controlled by two-way switches integral to the power window and lock switch and bezel unit on the trim panel of each front door. A second power window switch in the driver side switch and bezel unit allows the driver to control the passenger windows.
The power window switch for the driver side front door window has an Auto label on it. This switch has a second detent position beyond the normal Down position that provides an automatic one-touch window down feature. This feature is controlled by an electronic circuit and a relay that are integral to the Driver Door Module.
The power window switches control the battery and ground feeds to the power window motors. All of the passenger door power window switches receive their battery and ground feeds through the circuitry of the Driver Door Module. When the power window lockout switch is in the Lock position, the battery feed for the individual passenger door power window switches is interrupted.
A Light-Emitting Diode (LED) in the paddle of each switch is illuminated whenever the ignition switch is in the ON position. However, the LEDs for the passenger power window switches are extinguished whenever the driver selects the Lock position with the power window lockout switch.
Power Window Motor
A permanent magnet reversible motor moves the window regulator through an integral gearbox mechanism. A positive and negative battery connection to the two motor terminals will cause the motor to rotate in one direction. Reversing the current through these same two connections will cause the motor to rotate in the opposite direction.
In addition, each power window motor is equipped with an integral self-resetting circuit breaker to protect the motor from overloads. The power window motor and gearbox assembly cannot be repaired and, if faulty or damaged, the entire power window regulator assembly must be replaced.
Circuit Breaker
An automatic resetting circuit breaker in the junction block is used to protect the power window system circuit. The circuit breaker can protect the system from a short circuit, or from an overload condition caused by an obstructed or stuck window glass or regulator.
The circuit breaker cannot be repaired and, if faulty, it must be replaced.