Incomplete Latch Cinch - No Pawl Transition

Tests 1 - 2:

Tests 3 - 6:

SYMPTOM
INCOMPLETE LATCH CINCH - NO PAWL TRANSITION

WHEN MONITORED
Whenever the power sliding door in operating.

SET CONDITION
The pawl switch was not detected as returning to ground during the transition between secondary and primary cinch operation. NOTE: The door may not be fully cinched during this condition. The door may cinch to primary but not be fully seated and may pop off back to secondary.

POSSIBLE CAUSES
- DTC present
- Binding door
- Ground wire open
- PAWL switch sense wire open
- PAWL switch sense wire short to ground
- PAWL switch