Incomplete Power Open - Excessive H.E. Counts/No Engagement

Test 1:

Tests 2 - 7:

Tests 8 - 13:

Test 14:

SYMPTOM
INCOMPLETE POWER OPEN - EXCESSIVE H.E. COUNTS/NON ENGAGEMENT

WHEN MONITORED
During Power Liftgate opening cycle.

SET CONDITION
If the PLG Module detects that the Power Liftgate Motor has generated more than 700 hall effect pulses during a full power cycle, this code will set.

POSSIBLE CAUSES
- DTC present
- Power liftgate module - hall effect open
- Binding liftgate
- Liftgate gear engage driver wire open
- Liftgate gear engage driver wire short to ground
- Liftgate gear engage driver wire short to the liftgate gear disengage wire
- Liftgate gear disengage driver wire open
- Liftgate gear disengage driver wire short to ground
- Power liftgate module - gear engage circuit open
- Power liftgate motor
- Power liftgate motor - gear engage open
- Power liftgate motor - gear engage short to ground
- Power liftgate motor - gear engage shorted