Incomplete Power Open - Full Open Switch Failure/No Engagement

Tests 1 - 2:

Tests 3 - 4:

SYMPTOM
INCOMPLETE POWER OPEN - FULL OPEN SWITCH FAILURE/NON ENGAGEMENT

WHEN MONITORED
During the Power Liftgate open cycle.

SET CONDITION
The Full Open Switch was detected as closed before 200 hall effect pulses were counted since the start of the open operation. May be triggered by an intermittent full open switch failure or a non gear engagement.

POSSIBLE CAUSES
- DTC present
- Obstruction or sticking full open switch
- Full open switch short to ground
- Power liftgate motor assembly - full open switch