Loss of Ignition Run Only

Tests 1 - 2:

Test 3:

SYMPTOM
LOSS OF IGNITION RUN ONLY

When Monitored and Set Condition:
LOSS OF IGNITION RUN ONLY

WHEN MONITORED
With the ignition in the run only position the ORC monitors the ORC Run Only Driver circuit for proper system voltage.

SET CONDITION
If the voltage on the ORC Run Only Driver circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Active FCM run only DTC's
- ORC, loss of run - start
- Stored code or intermittent condition
- Active code present